K R Suppliers

weberwall premium plaster is premixed plaster designed to provide smooth and compact surfaces both internal and external. weberwall premium plaster is a blend of portland cement, supplementary cementitious material, selected graded sand and polymer additives in the right proportion for perfect compactness and desired smoothness of the surface.
RMP is silt free and organic content free, graded sand provides best quality durable masonry surfaces with negligible cracks. We provide consistent, impurity-free material batch after batch to assure you a hassle-free solution. 

UltraTech READIPLAST is a ready mix cement plaster/render with high quality polymer additives, well graded sand and fillers for manual plastering applications.

Features And Benefits:

• Used in place of traditional plastering
• Consistent quality made using mix of well graded sand and additives
• Needs less curing and binds better to substrate
• Reduced water absorption hence enhanced durability
• Uniform and smooth finish to walls
• Quality plastering since it does not contain any impurity
• Convenient to apply
• Faster completion of work
• Negligible wastage due to least rebound
• Superior Quality
• Ready to use
• Saves time and labour
• Less curing

Areas of Application: UltraTech READIPLAST can be used for plastering on inner and outer walls. It can also be used effectively on brick, block, stone walls as well as concrete surfaces. Ideal for well-prepared walls with maximum thickness of plastering up to 15 mm.

Safety Directions:

• UltraTech READIPLAST is non-toxic. Use of gloves and goggles recommended. Any splashes to the skin or eyes should be washed off with clean water immediately
• In case of prolonged irritation, medical advice should be sought. UltraTech READIPLAST is non-flammable

Birla Aerocon Ready Mix Plaster its applied to masonry interiors and exteriors to achieve a smooth surface that protects against water and cracks and tends durability to the building. The speed of applicatio of the plaster and how quickly it sets largely determines the pace of construction.

Traditionally Birla Aerocon Ready Mix Plaster has been mixed at the job sire but there are many drawbacks, associated with the practice. Now its the time to put an end to these and move ahead with new age Birla Aerocon Ready Mix Plaster.

Outstanding Features:

• Compact Plaster to effectively reduce void gaps
• Highly Durable
• Excellent Workability
• Superior Finish
• A variety of substrates
• Graded sand with no silt content
• Ready to use
• Saves time
• Consistent cement sand ratio
• Less rebounding

MATRIC BUILD Ready Mix Plaster is a premixed cement-based solution to substitute for the traditional site mix wall plaster process. The solution consists of processed sand which is graded and distributed as per particle size and proportionately mixed, cement, and water soluble polymers which act as additives. The application method requires mixing of water before application and the mix is ready for plastering. Premix plaster can be used for both external and internal plastering.

 

Ingredients: OPC 53 Cement, Modified Graded Sand, Fibres, Polymers and some special additives.

MATRIC BUILD Ready Mix Plaster can be applied on:

• AAC Block Walls
• Fly Ash Brick Walls
• Clay Brick Walls
• Stone Walls
• Concrete Block Walls
• Concrete Surfaces

 

Internal Wall: 8-10 mm single coat is recommended for internal plaster covering.

 

External Wall: Two coats are recommended to cover the external side of walls i.e. Base coat of 8-12 mm and Finish coat of 8-12 mm to get a total thickness of around 18-20 mm, further depending upon site conditions. After Base coat, minimum 2 to 3 days curing must be done before application of Finish coat.

Features And Benefits:

• High Strength: High compressive and tensile strength increases masonry strength and load-bearing capacity.
• Easy Application: The material is pre-mixed and only water has to be added on site. This makes the process of plastering much easier and quicker.
• Consistency: Due to the manufacturing process and accurate particle size distribution, the ready mix bags are of consistent quality.
• Hassle Free: No hassle of maintaining mixing ratio, whereas in the conventional method labour and supervision are required to prepare the mix.
• Shrinkage Cracks: No Shrinkage cracks, as ready mix plaster raw materials are tested and accurately mixed with specific particle size and quantity.
• No Wastage: The wastage caused in the conventional site mix process while sand sieving and mixing material is totally avoided.
• Higher Coverage: Due to lower density and high volume, it covers (approx) 16 - 20 sq ft/ 40 kg bag with a thickness of 10 - 12 mm at AAC wall & (approx) 12 - 16 sq ft/ 40 kg bag with a thickness of 10 - 12 mm at red / fly ash brick wall.
• Storage: Easy to maintain stock as equal size packaging in 40 kg bag form is provided.
• Economical: It provides smooth finish walls even in a single coat. Hence saves time and cost required for putty coating.
• Finish: Surface finish after application is excellent and equal due to best particle size grading, hence maximizing wall plaster performance.
• Ready Mixed: No site mix and blending of powder are required. Only water is to be added.
• Availability: Unlike the uncertain availability of raw river sand, ready mix bags are available round the year.

 

We are engaged in offering a wide range of our products to our clients. Our range of all products is widely appreciated by our clients.

Readiplast is a ready mix cement plaster / render with a high quality polymer additives. It can be used on inner and outer walls. It can be used on brick, block, .